Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Wolf Tooth FOX Boost Front Thru Axle
$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle
Wolf Tooth FOX Front Thru Axle
$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$4.00 - $17.00
Whisky Parts Co. Tubeless Rim Tape.
Whisky Parts Co. Tubeless Rim Tape
$9.00 - $53.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Wheels Manufacturing Axle-08
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 141mm - 1 axle per bag
Wahoo Fitness KICKR SNAP 142 x 12mm Thru Axle Adapter
$59.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
WTB HTZ i23 29-inch TCS 2.0
$118.95
E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike
WTB KOM Light 29-inch
$99.95 - $114.95
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area
WTB KOM Tough 27.5-inch
$99.95 - $114.95
Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.
WTB KOM Tough 29-inch
$99.95 - $114.95
Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.
WTB TCS AL 46mm Presta Valve
$25.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WTB TCS Brass 46mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Velocity Deep-V Machined 700c Rim
$86.99 - $126.99
- Deep section Road racing, Triathlon, Commuting, Touring, Track racing, and Singlespeed rim for strength and aerodynamics - Hollow core aluminum with machined sidewalls for improved braking
Surly Nylon Rim Strip
$5.00
Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.
Surly Ultra New Hub Stainless Knurled Axle End Cap
$10.00
- Replacement part for Surly hubs
Sunlite Coaster Brake Parts
$5.00
Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.
Sun Ringle MTX 33 Rim
$48.50 - $76.99
Product specs: - Size:24", 26", 29" - Width:33.5 - Bead width: 33.5mm - Inner bead width: 26mm - Section height: 25.5mm - Weight (26"): 660g - Sleeved or welded - Hole count: 32, 36
Stan's No Tubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's No Tubes Flow EX3 27.5-inch
$135.00
Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier, and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
Stan's No Tubes Flow MK3 27.5 Front Wheels
$309.00 - $455.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Stan's No Tubes Neo Durasync Freehub
$80.00 - $85.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
Stan's No Tubes Neo Front Hub End Caps
$20.00 - $22.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's No Tubes Neo Hub Spring and Pawl Kit
$9.00
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.
Stan's No Tubes Threaded Valve Extenders
$27.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Stan's No Tubes Tubeless Valve Stems
$18.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Sta-Tru 20-inch Rear Wheel
$46.49 - $71.49
Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher
Spank 359 29-inch Rim
$114.99
The Spank 359 Rim is a radially compliant gravity rim featuring our Oohbah Inverted Inner Wall and BeadBite anti-burp technology. Optimized for DH, FR, and heavy enduro use. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling. - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved. - 5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles. - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures.
Spank Fratelli Tubeless Ready Tape
$14.99
SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments. - Material: Ultra Thin Polyamide - Width: 25mm or 30mm - Features: high temperature range adhesive, ideal for complex rim profile Installation: - Affix tape all the way around on the right side snug against the bead hook - Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes - Use a red-hot awl or similar to pierce the valve hole
Spank HEX J-Type R148 Rear Hub
$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
Spank HEX QRx135/141 Rear Hub Adapters
$22.99
Adapts HEX J-Type 135/142 and Gravel Rear Hubs to QRx135. Adapts HEX J-Type & Straightpull Boost 148 Rear Hubs to Boost QRx141 Compatible with: - HEX J-Type 135/142 and Gravel Rear Wheels - HEX Straightpull Boost Rear Wheels - XD and HG Freehub Bodies Not compatible with: - SPIKE/OOZY/SPOON hubs
Page 1 of 3 Next page