Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bikes

$6,199.00
THE TRAIL BIKES THAT LOVE TO PLAY The Santa Cruz Tallboy combines short travel efficiency with modern geometry to create a bike that's as up for the big climb as it is the big descent. These sporty 29ers are the perfect choice for riders considering a cross country bike but will likely never race. They climb efficiently, roll fast on the on the flats, and have some real capability for when the DH music goes from easy listening to rock-and-roll. Featuring a 130mm fork and 120mm of Virtual Pivot Point (VPP) rear suspension travel, Tallboy is sporty, capable, and fun.
$7,049.00
THE TRAIL BIKES THAT LOVE TO PLAY The Santa Cruz Tallboy combines short travel efficiency with modern geometry to create a bike that's as up for the big climb as it is the big descent. These sporty 29ers are the perfect choice for riders considering a cross country bike but will likely never race. They climb efficiently, roll fast on the on the flats, and have some real capability for when the DH music goes from easy listening to rock-and-roll. Featuring a 130mm fork and 120mm of Virtual Pivot Point (VPP) rear suspension travel, Tallboy is sporty, capable, and fun.
$5,499.00
The Downhiller's XC Bike The Tallboy has earned a loyal following amongst those who seek a go-to bike that will hold up to the relentless hammering of "power hour" hot laps or long days in the saddle harvesting the best TRs. The highly-refined VPP suspension on the Tallboy combines pedaling efficiency and all-out bump-chomping prowess. If ever there was a gravity riders' XC bike, the Tallboy is it. Fully dialed at every size: Proportional Geometry and frame stiffness tune Chainstay length and seat angle are matched to the frame size (STA steepens and rear centre grows as frame size increases) so that every rider, no matter what height, gets the same balance of geometry and handling characteristics. We tailor stiffness for every size to make sure everyone gets the same ride quality. Bigger riders means greater stresses on larger frames, but that's remedied with our size-specific frame stiffness tunes.
$2,599.00
Fargo Apex 1 is Salsa's drop-bar off-road touring bike built to shatter limits. Ride it on singletrack, gravel, or other places where you wouldn't take your standard touring bike. A triple-butted steel frame and huge tire clearance provide cushion on rugged roads. Alternator dropouts allow for any drivetrain you can imagine, and cargo mounts let you carry enough to go days between resupplies. SRAM's Apex 1 drivetrain is a reliable workhorse with the range for many adventures. - Triple Butted Cromoly Tubeset Salsa-designed, triple-butted, and frame size-specific seamless CroMoly tubing - Firestarter 110 Fork Light, tough, and ultra-versatile, this is our carbon fork for all-terrain riding. Two sets of Three-Pack mounts on each fork leg give you room for extra water or Anything Cages, and mid-blade mounts accommodate low rider racks. Firestarter fits a wide range of tire sizes, from 27.5 x 2.8–3.0" to 29 x 2.2–3.0" - Fargo Geometry Designed as a drop bar mountain bike, optimized for fit with the Salsa Woodchipper or Cowchipper handlebars. Capable of handling everything from technical singletrack trails, two-track, gravel, and the occasional paved road. Predictable handling with or without a load. The bike to ride for multiple-surface excursions - Alternator Dropouts V1.5 A split-able version of our renowned Alternator Dropout for ultimate drivetrain versatility. Run singlespeed or geared, QR or thru-axle, freehub or Rohloff, or Gates Belt Drive. Set Alternator Dropouts all the way forward for a shorter wheelbase that results in quick and nimble handling or set back for more stability. See our Alternator Page for more info - Belt Drive Compatible Tested and certified for belt drive use - 29 x 2.2" Wheel/Tire Spec This wheel and tire size rolls fast, keeps weight down, and offers excellent maneuverability - Multiple Wheelsize Versatility Fargo geometry and spacing can accommodate 27.5+, 29", and, on sizes small to x-large, 29+ making for a highly capable bike that's ready for just about any endeavor - Rear Rack Friendly Designed for use with the Salsa Alternator Plus Rack 135/142/148
$999.00
Journeyer is Salsa's gateway to all-road adventures. The geometry provides comfort and confidence on any road surface. Versatile cargo carrying options extend riding range and allow for many different missions. It all comes together to create the perfect introduction to all-road riding. - 6061-T6 alloy frame - Flat mount brakes - Internal cable routing including stealth dropper post routing - Water, tool, and accessory mounts on frame and fork allow for longer rides - Compatible with 700c and 650b wheels and tires
$2,099.00
Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels
$4,599.00
A gravel ride can be whatever you want it to be: go for speed, go for distance, go for fun, go for an escape. No matter your goal, Warbird C GRX 810 2x is a comfortable and efficient way to get there. The carbon frame with Class 5 Vibration Reduction System (VRS) tames harsh roads. Our gravel race geometry grants you control on ruinous roads. Thoughtful mounting points provide places for everything from extra bottles to a light bikepacking setup. Shimano's GRX 810 2x drivetrain has proven itself as a dependable, high-performance gravel group with plenty of gear range for windy flats and steep climbs. Put it all together and you've got one of the best gravel bikes out there.
$8,799.00
Enduro courses. World Cup Downhill courses. It's hard to tell the difference between the two these days. Well, right up until the point when you have to grind your way to the top of the absolute hairball descent-that would be enduro. And that is also where the new Firebird 29 enters the picture-with its speed generating 29er wheels and a penchant for kicking ass. The Firebird 29's big wheels gobble up miles with ease, roll right over the gnar and add insane levels of traction to the mix. But this is no monster truck. The Firebird 29 is a lightweight machine that boasts a poppy, lively feel that long-travel 29ers have never possessed. Until now. Playful Yet Stable The Firebird 29 features a long front center, short chainstays, a low center of gravity and a decidedly slack 65-degree head angle to deliver unmatched stability and handling. Plus, a new flip-chip adjustment system in its upper linkage offers quick and easy geometry fine tuning. Taking a page from the Phoenix DH Carbon's progressive geometry, the Firebird combines some of the longest reach measurements in the sport, with short, 16.96" (431mm) chainstays. The Firebird's long and low geometry gives you increased stability at high speeds and on steep technical challenges, while its short chainstays provide a maneuverable, dynamic ride that makes it easy to put the bike precisely where you want it. The Bomb-Proof Bantam Weight The Firebird 29 has a lot to live up to. On one hand, it needs to withstand repeated pummelings at bike parks and on the toughest trails. It has to be bomb proof. On the other hand, it also needs to be incredibly light-this bike is meant to give you an edge on the climbs. Since a 29er wheelset inherently packs more grams than the same wheelset in a smaller, 27.5 diameter, we knew there couldn't be any fat on the Firebird 29 frame. So, we made it both bomb proof and lean. Thanks to our own hollow-core, high-compression carbon molding process and an exacting combination of composite materials and shapes, we are able to deliver an ultra-light frame that meets the same stringent testing requirements for strength and stiffness as our World Cup downhill bike. Firebird frames weigh in at a mere 7 pounds (3.2kg) while complete bikes tip the scales at sub-30 pounds(13.5kg).
$9,999.00
Enduro courses. World Cup Downhill courses. It's hard to tell the difference between the two these days. Well, right up until the point when you have to grind your way to the top of the absolute hairball descent-that would be enduro. And that is also where the new Firebird 29 enters the picture-with its speed generating 29er wheels and a penchant for kicking ass. The Firebird 29's big wheels gobble up miles with ease, roll right over the gnar and add insane levels of traction to the mix. But this is no monster truck. The Firebird 29 is a lightweight machine that boasts a poppy, lively feel that long-travel 29ers have never possessed. Until now. Playful Yet Stable The Firebird 29 features a long front center, short chainstays, a low center of gravity and a decidedly slack 65-degree head angle to deliver unmatched stability and handling. Plus, a new flip-chip adjustment system in its upper linkage offers quick and easy geometry fine tuning. Taking a page from the Phoenix DH Carbon's progressive geometry, the Firebird combines some of the longest reach measurements in the sport, with short, 16.96" (431mm) chainstays. The Firebird's long and low geometry gives you increased stability at high speeds and on steep technical challenges, while its short chainstays provide a maneuverable, dynamic ride that makes it easy to put the bike precisely where you want it. The Bomb-Proof Bantam Weight The Firebird 29 has a lot to live up to. On one hand, it needs to withstand repeated pummelings at bike parks and on the toughest trails. It has to be bomb proof. On the other hand, it also needs to be incredibly light-this bike is meant to give you an edge on the climbs. Since a 29er wheelset inherently packs more grams than the same wheelset in a smaller, 27.5 diameter, we knew there couldn't be any fat on the Firebird 29 frame. So, we made it both bomb proof and lean. Thanks to our own hollow-core, high-compression carbon molding process and an exacting combination of composite materials and shapes, we are able to deliver an ultra-light frame that meets the same stringent testing requirements for strength and stiffness as our World Cup downhill bike. Firebird frames weigh in at a mere 7 pounds (3.2kg) while complete bikes tip the scales at sub-30 pounds(13.5kg).
$11,999.00
Tear Down The Sky The Firebird has one goal – to be the fastest. The fastest Enduro bike for our team riders, the fastest park bike, the fastest way to rail a top-to-bottom mega-descent – no matter whether that descent is in Moab or Morzine. Every aspect of our long travel 29er is tailored toward the pursuit of unbridled velocity, from its progressive, size-specific geometry to the tuned perfection of its dw-Link suspension. Whether you're chasing EWS podium glory or harboring a burning desire to tear down the sky in a supersonic plume of dust, the Firebird is your ticket to pure speed. The DNA of Velocity Modern geometry tailored for aggressive riding lets the Firebird rail at warp speed with battleship stability and laser precision. A relaxed head angle, long reach, and generous wheelbase are the key ingredients of high-speed composure. Balance and responsiveness are brought into the mix via size-specific chainstays and seat tube angles, ensuring that the Firebird remains nimble and responsive at all times, in all conditions. 165mm of ultra-capable dw-link suspension soaks up everything from jumbled moonscapes to massive G-outs and still snaps to attention and climbs with more authority than bikes offering inches less travel. Fast up, fast down. Fast. Not As Sweet As It Looks "Sweet bike, man." It's the ultimate lift-line compliment. In the case of the Firebird, that sweetness is only skin deep. Appearances can be deceptive. When you're coming in way too hot on the wrong side of the safe line, you want a partner with lightning reflexes and the dispassionate calm of a cold blooded killer. The Firebird's Hollow Core carbon construction cleanly disguises its psychotic side with a taut, sturdy, deceptively lightweight frame that calmly gets you out of the most gripped situations, in much the same way that James Bond can get his hands really dirty while keeping his suit perfectly clean. Super-capable suspension, planted handling, perfectly selected components, shaken, not stirred; the cocktail mix for blazing speed. Drink up! Pivot's full carbon frame feature size-specific ride tuning, leading edge carbon fiber materials and Pivot's proprietary hollow core molding technology to ensure that every rider from 5'2" to 6'9" has a bike that feels perfect and performs at the optimum level for their size. - Long-and-low geometry for a confident, and size-specific chainstay lengths refine the EWS Podium performance for different sized riders. - Phoenix DH-inspired longer dw-link maximizes the Firebird's rearward wheel-path for erasing square edge bumps and maximizing control. - 165mm of supple-yet-efficient dw-link suspension travel featuring a vertically mounted trunnion metric coil-over or air shocks combined with 170mm front travel for unrivaled suspension performance. - Equipped with a 44mm offset 170mm-travel Fox Factory and Performance Series 38 FIT Grip2 forks. - Ultra-adjustable Fox Float X2, Float X, Live Valve, and DHX2 coil rear shock options. - Custom tuned Fox Live Valve builds allow for layers of tuning to allow for a plusher than plush feel unmatched by any other suspension setup. - Adjustable geometry with a flip chip upper link mount. - Compatible with both 29" and 27.5" wheel sizes without compromise thanks to the adjustable geometry for 29" 27.5" or MX wheel setups. - Fits tires up to 29x2.6" or 27.5x2.8" wide. - 12 x 157mm Super Boost Plus rear spacing adds stiffness and control. - 31.6mm size seatpost match with the Firebird's short seat tube with deep insertions for longer travel posts. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling the world. - 1.5" headtube provides increased front-end stiffness and tracking. - Hassle-free, full-length, internal cable routing. - All sizes fit a water bottle inside the front triangle. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
$4,799.00
From Singletrack to Snow—One Bike Rules It All Full carbon frame with a svelte top tube and stay shaping for long rides and epic adventure comfort. The LES Fat features a tailored carbon lay-up for each size ensuring optimal ride characteristics for all rider profiles. VERIFIED VERSATILITY The LES Fat fits all fat and plus wheel sizes, via the patented Swinger II dropout system, without compromises to the bike's geometry. The Swinger II dropout system also allows for ease of switching between a geared and single speed set up. EASY ON THE KNEES The LES Fat features a kind-to-your-knees narrow Q-factor design. With a minimum Q-factor of 210mm, this is similar to the Q-factor on bikes designed for the narrower 170mm rear hub spacing. ENGINEERED FOR THE INDIVIDUAL Our engineers know a bike's set-up is subjective, so for the LES Fat they made it possible to swap the suspension, wheel size and drivetrain to the rider's preference. Ensuring the perfect set-up for ample saddle time. PRODUCT DETAILS - Get everything you need to know about the Les Fat. - Fits all fat/plus wheel sizes (26" X 3.8-5.0", 27.5" X 3.8-4.5", 27.5+, 29" and 29+) via Swinger II dropout system, without geometry compromises - New 27.5" Fat and 27.5+ wheel and tire spec - Full carbon frame features svelte top tube and stay shaping for long ride and epic adventure comfort - Adjustable chainstay length - Kind-to-your-knees, narrow Q-factor design - 2x, 1x and singlespeed compatible - 197mm rear spacing and optimized design clears 5" tires with massive clearance for snow, mud and sand - Pivot-designed carbon fork with 150mm spacing. Suspension fork compatible - Integrated rear rack mounts - Three water-bottle mounts - 10-year warranty
$6,699.00
A Podium Seeking Missile. UNCOMPROMISING PERFORMANCE The all-new Mach 4 SL; a podium-seeking missile crafted from the ground up is a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and traceability. MORE FUN Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build is aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock. LESS WEIGHT, A CONTINUING EVOLUTION Thanks to the continuing evolution of our proprietary Hollow Core carbon fiber construction, the new Mach 4SL carves an impressive 280 grams out of the previous generation Mach 4SL. This absence of mass was achieved while improving the dw-link suspension, and without sacrificing strength, frame stiffness, or handling integrity. PRODUCT DETAILS: Get everything you need to know about the Mach 4 SL. - XC-Tuned DW-Link™ Suspension - New XC Adapted Travel-Adjustable Flip-Chip - Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel - Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel - Lighter, More Durable High-Load Enduro Max bearings - Size-Specific Carbon Layup Across Size Range - Low Standover Fits Riders 4’10” to 6’ 7” - Large Water Bottle Clearance on All Sizes - Pivot’s full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials, and Pivot's proprietary hollow core molding technology to ensure that every rider from 4’10” to 6’7” has a bike that feels perfect and performs at the optimum level for their size. - Injection Molded Rubberized Frame Protection - Full Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible Under Top Tube and BB - Simplified Twistloc Suspension Lockout Available - 100mm & 120mm Fox Fork Options
$6,199.00
UNCOMPROMISING PERFORMANCE The all-new Mach 4 SL; a podium seeking missile crafted from the ground up as a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and tractability. MORE FUN Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build, aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock. - XC-Tuned DW-Link™ Suspension - New XC Adapted Travel-Adjustable Flip-Chip - Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel - Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel - Lighter, More Durable High-Load Enduro Max bearings - Size-Specific Carbon Layup Across Size Range - Low Standover Fits Riders 4'10" to 6' 7" - Large Water Bottle Clearance on All Sizes - Pivot's full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials, and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'10" to 6'7" has a bike that feels perfect and performs at the optimum level for their size. - Injection Molded Rubberized Frame Protection - Full Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible Under Top Tube and BB - Simplified Twistloc Suspension Lockout
$1,799.00
With guns-of-literal-steel, the Point reigns supreme over jump lines, urban bowls, and pump tracks. From pump track groms to the jaw dropping gymnastics of the pros, riders around the globe crave the ultimate beauty and time-tested feel of double-butted 4130 chromoly steel. Ultra-modern dirt jump geometry manuals on command and takes flight effortlessly. This is the Pivot Point; the fulcrum of radness. Whether single-speed or geared, the Point is the wherever, whenever complete bicycle for every rider. - Double Butted 4130 Chromoly delivers the finest "feel of steel" - Ultra-Modern park geometry features long reach and ultra-short chainstays - Dropouts on the frame only option come with a derailleur hanger to run geared or single-speed - Cable routing for geared or single-speed builds - Easy to use and extremely secure chain tension adjustment system with chainstay adjustment range of 385 mm – 400 mm - Available as a one-size-fits-most frame or complete bike
$8,499.00
SHADOWCAT? YES, SHADOWCAT. Lithe, agile, sharp, fast and fun, the Shadowcat is a trail-carving expression of blazing speed and feline creative mayhem. Pivot's latest offering capitalizes on the acceleration and responsiveness of 27.5" wheels and acclaimed dw-link suspension to bring to life a bike that offers transformative capability for riders of every stripe. LITHE A new frame that weighs less than our impressively light Trail 429 frame. Heck, this frame weighs only 45 grams more than our featherlight Mach 4SL. We're replacing the beloved Mach 5.5 with a 140mm ripper of a bike that weighs less than many dedicated XC machines. Super-low standover; small kittens and playful cats rejoice! - Ultra-Light Hollow Core Carbon Frame. - Class-Leading Strength to Weight Ratio. - Seamlessly Integrated Headset Cups save weight and ensure easy service. - Excellent Standover height for all sizes. - Custom-tuned Fox Live Valve builds allow for layers of tuning to allow for a plusher than plush feel unmatched by any other suspension setup. - 140mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160mm-travel Fox 36 fork. - Agile and playful 27.5" wheels with tires up to 2.4" - Long and low modern geometry for a confident ride. - Short 430mm Chainstays for snappy cornering. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame. - Hassle free full internal routing with Pivot cable port system. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling the world.
$6,999.00
SHADOWCAT? YES, SHADOWCAT. Lithe, agile, sharp, fast and fun, the Shadowcat is a trail-carving expression of blazing speed and feline creative mayhem. Pivot’s latest offering capitalizes on the acceleration and responsiveness of 27.5” wheels and acclaimed dw-link suspension to bring to life a bike that offers transformative capability for riders of every stripe. LITHE A new frame that weighs less than our impressively light Trail 429 frame. Heck, this frame weighs only 45 grams more than our featherlight Mach 4SL. We’re replacing the beloved Mach 5.5 with a 140mm ripper of a bike that weighs less than many dedicated XC machines. Super-low standover; small kittens and playful cats rejoice! - Ultra-Light Hollow Core Carbon Frame. - Class-Leading Strength to Weight Ratio. - Seamlessly Integrated Headset Cups save weight and ensure easy service. - Excellent Standover height for all sizes. - Custom-tuned Fox Live Valve builds allow for layers of tuning to allow for a plusher than plush feel unmatched by any other suspension setup. - 140mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160mm-travel Fox 36 fork. - Agile and playful 27.5” wheels with tires up to 2.4” - Long and low modern geometry for a confident ride. - Short 430mm Chainstays for snappy cornering. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame. - Hassle-free full internal routing with Pivot cable port system. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling the world.
$6,799.00
SHADOWCAT? YES, SHADOWCAT. Lithe, agile, sharp, fast and fun, the Shadowcat is a trail-carving expression of blazing speed and feline creative mayhem. Pivot's latest offering capitalizes on the acceleration and responsiveness of 27.5" wheels and acclaimed dw-link suspension to bring to life a bike that offers transformative capability for riders of every stripe. LITHE A new frame that weighs less than our impressively light Trail 429 frame. Heck, this frame weighs only 45 grams more than our featherlight Mach 4SL. We're replacing the beloved Mach 5.5 with a 140mm ripper of a bike that weighs less than many dedicated XC machines. Super-low standover; small kittens and playful cats rejoice! - Ultra-Light Hollow Core Carbon Frame. - Class-Leading Strength to Weight Ratio. - Seamlessly Integrated Headset Cups save weight and ensure easy service. - Excellent Standover height for all sizes. - Custom tuned Fox Live Valve builds allow for layers of tuning to allow for a plusher than plush feel unmatched by any other suspension setup. - 140mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160mm-travel Fox 36 fork. - Agile and playful 27.5" wheels with tires up to 2.4" - Long and low modern geometry for a confident ride. - Short 430mm Chainstays for snappy cornering. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame. - Hassle free full internal routing with Pivot cable port system. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling the world.
$8,699.00
Do Everything, and Do It Better The new Switchblade has a slacker head angle, steeper seat angle, increased reach and a longer wheelbase than its predecessor. Size-specific chainstays are tucked in and responsive but grow incrementally longer on larger frames. This translates to added stability at warp speeds while still maintaining the snap and pop that is ingrained in the Switchblade’s DNA. From Trail to Park The new Switchblade is light enough to pedal all day, but stout enough to run a Fox 38 without any worries. You can spin this rig up into the jagged high places, and it is burly enough, composed enough, planted enough and smooth enough to smash every line all the way back down, laughing the whole way. Hail the Evolution! The latest iteration of this legendary machine features an incredibly refined dw-Link suspension that stitches together the pedaling response and agility of the Trail 429 with the battle-hardened, EWS-proven, big terrain suspension and handling chops of the Firebird. Pivot trail bikes pedal with near cross-country race efficiency for the longest, steepest climbs, but with the chops to carry you through technical trails that verge on black diamond. These bikes have you covered no matter what the trail dishes out. PRODUCT DETAILS: - Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+” and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
$9,899.00 - $10,099.00
Do Everything, and Do It Better The new Switchblade has a slacker head angle, steeper seat angle, increased reach and a longer wheelbase than its predecessor. Size-specific chainstays are tucked in and responsive but grow incrementally longer on larger frames. This translates to added stability at warp speeds while still maintaining the snap and pop that is ingrained in the Switchblade’s DNA. From Trail to Park The new Switchblade is light enough to pedal all day, but stout enough to run a Fox 38 without any worries. You can spin this rig up into the jagged high places, and it is burly enough, composed enough, planted enough and smooth enough to smash every line all the way back down, laughing the whole way. Hail the Evolution! The latest iteration of this legendary machine features an incredibly refined dw-Link suspension that stitches together the pedaling response and agility of the Trail 429 with the battle-hardened, EWS-proven, big terrain suspension and handling chops of the Firebird. Pivot trail bikes pedal with near cross-country race efficiency for the longest, steepest climbs, but with the chops to carry you through technical trails that verge on black diamond. These bikes have you covered no matter what the trail dishes out. PRODUCT DETAILS: - Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+” and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
$6,999.00
Do Everything, and Do It Better The new Switchblade has a slacker head angle, steeper seat angle, increased reach and a longer wheelbase than its predecessor. Size-specific chainstays are tucked in and responsive but grow incrementally longer on larger frames. This translates to added stability at warp speeds while still maintaining the snap and pop that is ingrained in the Switchblade’s DNA. From Trail to Park The new Switchblade is light enough to pedal all day, but stout enough to run a Fox 38 without any worries. You can spin this rig up into the jagged high places, and it is burly enough, composed enough, planted enough and smooth enough to smash every line all the way back down, laughing the whole way. Hail the Evolution! The latest iteration of this legendary machine features an incredibly refined dw-Link suspension that stitches together the pedaling response and agility of the Trail 429 with the battle-hardened, EWS-proven, big terrain suspension and handling chops of the Firebird. Pivot trail bikes pedal with near cross-country race efficiency for the longest, steepest climbs, but with the chops to carry you through technical trails that verge on black diamond. These bikes have you covered no matter what the trail dishes out. PRODUCT DETAILS: - Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+” and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
$6,399.00
Do Everything, and Do It Better The new Switchblade has a slacker head angle, steeper seat angle, increased reach and a longer wheelbase than its predecessor. Size-specific chainstays are tucked in and responsive but grow incrementally longer on larger frames. This translates to added stability at warp speeds while still maintaining the snap and pop that is ingrained in the Switchblade’s DNA. From Trail to Park The new Switchblade is light enough to pedal all day, but stout enough to run a Fox 38 without any worries. You can spin this rig up into the jagged high places, and it is burly enough, composed enough, planted enough and smooth enough to smash every line all the way back down, laughing the whole way. Hail the Evolution! The latest iteration of this legendary machine features an incredibly refined dw-Link suspension that stitches together the pedaling response and agility of the Trail 429 with the battle-hardened, EWS-proven, big terrain suspension and handling chops of the Firebird. Pivot trail bikes pedal with near cross-country race efficiency for the longest, steepest climbs, but with the chops to carry you through technical trails that verge on black diamond. These bikes have you covered no matter what the trail dishes out. PRODUCT DETAILS: - Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+” and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
$8,699.00
The sequel to the Switchblade story heralds a new era of all-mountain riding, with more travel, unrivaled versatility and progressive geometry. It unleashes dominance over enduro inspired descents, generates speed, and delivers the finesse needed for power moves on technical climbs. With a masterfully designed new dw-link shock layout, riders can optimize suspension performance like never before. The all-new Switchblade cleans the impossible, threads the needle, and delivers the freedom to explore. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. - Ultra-light, size-specific optimized full Hollow Core Carbon frame featuring leading-edge carbon fiber materials and Pivot's proprietary molding technology for a lighter frame and higher stiffness to weight ratio - Ultra-adjustable custom-tuned Fox DPX2 rear shock with all-new internals - Compatible with both 29, 27.5+" and 27.5+" rear/29" front (reverse mullet) wheel sizes without compromise thanks to the adjustable geometry - 142mm of supple-yet-efficient dw-link suspension - Large water bottle fits inside all size frames - Fits tires up to 29x2.6" or 27.5x2.8" wide - Full Fox Live Valve integration and build options - Progressive geometry with short seat tubes for long travel dropper posts. - Hassle-free, full-length, internal cable routing with Pivot's easy to service and silent Cable Port System - Equipped with a 44mm offset 160mm-travel Fox 36 FIT Grip2 Factory and Performance Series forks - Flip-chip upper linkage mount for adjustable geometry in seconds - Fits riders between 5' and 6'7"
$6,399.00
The sequel to the Switchblade story heralds a new era of all-mountain riding, with more travel, unrivaled versatility and progressive geometry. It unleashes dominance over enduro inspired descents, generates speed, and delivers the finesse needed for power moves on technical climbs. With a masterfully designed new dw-link shock layout, riders can optimize suspension performance like never before. The all-new Switchblade cleans the impossible, threads the needle, and delivers the freedom to explore. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. - Ultra-light, size-specific optimized full Hollow Core Carbon frame featuring leading-edge carbon fiber materials and Pivot's proprietary molding technology for a lighter frame and higher stiffness to weight ratio - Ultra-adjustable custom-tuned Fox DPX2 rear shock with all-new internals - Compatible with both 29, 27.5+" and 27.5+" rear/29" front (reverse mullet) wheel sizes without compromise thanks to the adjustable geometry - 142mm of supple-yet-efficient dw-link suspension - Large water bottle fits inside all size frames - Fits tires up to 29x2.6" or 27.5x2.8" wide - Full Fox Live Valve integration and build options - Progressive geometry with short seat tubes for long travel dropper posts. - Hassle-free, full-length, internal cable routing with Pivot's easy to service and silent Cable Port System - Equipped with a 44mm offset 160mm-travel Fox 36 FIT Grip2 Factory and Performance Series forks - Flip-chip upper linkage mount for adjustable geometry in seconds - Fits riders between 5' and 6'7"
$8,699.00
- Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle-free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+", and 27.5" rear/29" front (mullet) wheel sizes without compromise thanks to the Flip chip's adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.
$9,899.00
All-Mountain Attitude, Race Bike Reflexes. Evolution of a Classic This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We've broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine tuning of the geometry toward either the rowdy or racy ends of the spectrum. All-Star Suspension Is it possible for a bike to be both razor sharp and butter smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we've reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate. Our Strongest, Lightest, Carbon Fiber Chassis Through continued evolution of our proprietary Hollow Core carbon frame construction, we carved more than 300 grams from the chassis, achieving an XC-race frame weight with incredible all-mountain strength and stiffness, on par with dedicated flyweight race bikes.
$7,699.00
The Trail 429 might well be the perfect category defying trail bike. Progressive geometry and super capable suspension give hard charging riders the tools they need to thrive in jumpy and steep terrain. 120mm of travel has never felt this plush or this composed. This very same super-refined dw-link suspension also delivers whip-crack pedal response and acceleration, aided and abetted by the strongest, lightest carbon fiber chassis we've ever developed. The sharp-end of the stick XC capability of this bike is eye-opening, on par with dedicated flyweight race bikes. This is a bike that you can shred with confidence everywhere from 24-hour race courses to untamed high alpine singletrack. - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertically trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot's easy to service and ultra-quiet Pivot Cable Port System - Fits riders between 4'10" and 6'7" with X-Small to X-Large size offerings - Pivot's full carbon frame feature size-specific ride tuning, leading edge carbon fiber materials and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'11" to 6'7" has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$8,699.00
The Trail 429 might well be the perfect category defying trail bike. Progressive geometry and super capable suspension give hard charging riders the tools they need to thrive in jumpy and steep terrain. 120mm of travel has never felt this plush or this composed. This very same super-refined dw-link suspension also delivers whip-crack pedal response and acceleration, aided and abetted by the strongest, lightest carbon fiber chassis we've ever developed. The sharp-end of the stick XC capability of this bike is eye-opening, on par with dedicated flyweight race bikes. This is a bike that you can shred with confidence everywhere from 24-hour race courses to untamed high alpine singletrack. - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertically trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot's easy to service and ultra-quiet Pivot Cable Port System - Fits riders between 4'10" and 6'7" with X-Small to X-Large size offerings - Pivot's full carbon frame feature size-specific ride tuning, leading edge carbon fiber materials and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'11" to 6'7" has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$6,799.00
Evolution of a Classic This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We’ve broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine-tuning of the geometry toward either the rowdy or racy ends of the spectrum. All-Star Suspension Is it possible for a bike to be both razor-sharp and butter-smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we’ve reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate. Product Details: - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link® prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertical trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot’s easy-to-service and ultra-quiet Pivot Cable Port System - Fits riders between 4’10” and 6’7” with X-Small to X-Large size offerings - Pivot’s full carbon frame features size-specific ride tuning, leading edge carbon fiber materials, and Pivot’s proprietary hollow core molding technology to ensure that every rider from 4’11” to 6’7” has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$6,599.00
Evolution of a Classic This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We’ve broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine-tuning of the geometry toward either the rowdy or racy ends of the spectrum. All-Star Suspension Is it possible for a bike to be both razor-sharp and butter-smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we’ve reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate. Product Details: - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link® prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertical trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot’s easy-to-service and ultra-quiet Pivot Cable Port System - Fits riders between 4’10” and 6’7” with X-Small to X-Large size offerings - Pivot’s full carbon frame features size-specific ride tuning, leading edge carbon fiber materials, and Pivot’s proprietary hollow core molding technology to ensure that every rider from 4’11” to 6’7” has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$6,699.00
At the Speed of Imagination ENDLESS DROP BAR POSSIBILITIES With generous tire clearance thanks to dual dropped chainstays, the Vault is a tire change away from being ready for any road and any pursuit. From 25c's to high volume 650b, set your tire selection free, and tackle anything from primitive gravel to smooth single track to asphalt, and everything in between. ALL-DAY, ALL TERRAIN COMFORT Patent pending ISO FLEX seat post technology is without equal when it comes to all-day, all-terrain pedaling comfort, and our award-winning gravel bike frames are uniquely ride tuned for compliance. Custom tuned carbon layups and the ISO Flex seat post keep the Vault ride experience stable and smooth for hour after hour, The Pivot Vault truly covers every mile at the Speed of Imagination. BOUNDARYLESS IN THE PNW Boundaries recede aboard the Pivot Vault. The Columbia River gorge and the terrain on both the Oregon and Washington sides of the river are rich in geographical history, connecting paved, gravel, and singletrack trails that are rich in opportunity for quintessential gravel exploring. PRODUCT DETAILS: Get everything you need to know about the Vault. - Next-generation cross/gravel/road geometry – works for any surface - Gobs of tire clearance and 1x or 2x drivetrain compatible - Clears sub-compact chainrings, traditional road gearing, and 1x systems with clearance for crank arm based power meters - Removable FD mount with integrated cover - Fits up to 700 X 47C and 650b x 2.0" tires - Patent pending ISO FLEX Technology fits 27.2 or 30.9 seatposts and isolates the seatpost from the frame for extraordinary comfort with uncompromising frame stiffness and control - Internal cable routing for all lines including stealth style dropper posts via Pivot's easy to service and silent Cable Port System - Top tube bag mounts to fuel the longest rides - Hidden fender mounts for a clean, sleek appearance and all weather versatility - Full carbon frame featuring proprietary hollow core internal molding technology for a high stiffness to weight ratio - Optimized layup structure with ideal top tube and stay shaping for comfort and power output on long rides, rough roads and epic adventures - BB386EVO bottom bracket substantially increases torsional rigidity, strength and power transfer, while providing increased rear tire clearance - Frame weight: 998 grams - Available as a complete bike or as a frame/fork/headset - Sizes XS, S, M, L, XL for riders between 5' (152cm) and 6'5" (196cm)
$7,599.00
At the Speed of Imagination ENDLESS DROP BAR POSSIBILITIES With generous tire clearance thanks to dual dropped chainstays, the Vault is a tire change away from being ready for any road and any pursuit. From 25c's to high volume 650b, set your tire selection free, and tackle anything from primitive gravel to smooth single track to asphalt, and everything in between. ALL-DAY, ALL TERRAIN COMFORT Patent pending ISO FLEX seat post technology is without equal when it comes to all-day, all-terrain pedaling comfort, and our award-winning gravel bike frames are uniquely ride tuned for compliance. Custom tuned carbon layups and the ISO Flex seat post keep the Vault ride experience stable and smooth for hour after hour, The Pivot Vault truly covers every mile at the Speed of Imagination. BOUNDARYLESS IN THE PNW Boundaries recede aboard the Pivot Vault. The Columbia River gorge and the terrain on both the Oregon and Washington sides of the river are rich in geographical history, connecting paved, gravel, and singletrack trails that are rich in opportunity for quintessential gravel exploring. PRODUCT DETAILS: Get everything you need to know about the Vault. - Next-generation cross/gravel/road geometry – works for any surface - Gobs of tire clearance and 1x or 2x drivetrain compatible - Clears sub-compact chainrings, traditional road gearing, and 1x systems with clearance for crank arm based power meters - Removable FD mount with integrated cover - Fits up to 700 X 47C and 650b x 2.0" tires - Patent pending ISO FLEX Technology fits 27.2 or 30.9 seatposts and isolates the seatpost from the frame for extraordinary comfort with uncompromising frame stiffness and control - Internal cable routing for all lines including stealth style dropper posts via Pivot's easy to service and silent Cable Port System - Top tube bag mounts to fuel the longest rides - Hidden fender mounts for a clean, sleek appearance and all weather versatility - Full carbon frame featuring proprietary hollow core internal molding technology for a high stiffness to weight ratio - Optimized layup structure with ideal top tube and stay shaping for comfort and power output on long rides, rough roads and epic adventures - BB386EVO bottom bracket substantially increases torsional rigidity, strength and power transfer, while providing increased rear tire clearance - Frame weight: 998 grams - Available as a complete bike or as a frame/fork/headset - Sizes XS, S, M, L, XL for riders between 5' (152cm) and 6'5" (196cm)
$649.00
The new Cesta 7 is built for comfort, perfect for boardwalks and just cruising around town. With plush 650b x 2.2" tires, and a relaxed easy geometry it's like riding on a cloud. The gel saddle molds according to your body providing extra comfort through customization. Made with a lightweight aluminum frame that is resistant to rust. The 7 speeds accommodate the rider who travels on varying terrains.
$829.00
Style points matter. The Coco pays homage to the classic European step-through bicycle. Internal shift cable routing helps keeps the lines clean and sleek, and puncture-resistant tires help keep the ride stress-free. This is the bike that makes neighborhood cruising more fun, so we don’t blame you if you “forgot the milk/beer/wine” and need to ride back to the store to pick it up. Don’t be surprised if you turn a few heads on this bike!
$829.00
Style points matter. The Coco pays homage to the classic European step-through bicycle. Internal shift cable routing helps keeps the lines clean and sleek, and puncture-resistant tires help keep the ride stress-free. This is the bike that makes neighborhood cruising more fun, so we don't blame you if you "forgot the milk/beer/wine" and need to ride back to the store to pick it up. Don't be surprised if you turn a few heads on this bike!
$659.00
The Dew is our classic all-around commuter/townie option for someone looking for an affordable, comfortable ride. The Dew is an efficient bike that features a drivetrain with a broad gear range and integrated brake and shifter levers. Equal parts functional and fun, the Dew is equally at home hopping curbs on urban rides, cruising the bike paths, or rallying your local taco truck time trial.
$659.00
The Dew is our classic all-around commuter/townie option for someone looking for an affordable, comfortable ride. We've modernized the Dew with a sweet new 2x8 Shimano drivetrain and integrated brake and shifter levers. Equal parts functional and fun, the Dew is equally at home hopping curbs on urban rides, cruising the bike paths, or rallying your local taco truck time trial. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. Tough, durable, light alloys, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. 650B Wheels 650B wheels and tires have a similar overall diameter to a traditional 700c gravel or commuting tire but with a smaller diameter rim and a wider, taller tire. The extra air volume in this new generation of urban and mixed-surface tires means they can be run comfortably at lower pressures while still rolling quickly on a variety of surfaces. It's the best of both worlds.
$829.00
When riding your bike, you want a few simple things. Comfort, function, and control are at the top of the list, so we built the Dew Plus with all three in mind. The Dew Plus features a 10-speed drivetrain for smooth shifting and a broad gear range. Hydraulic disc brakes keep the bike in control in tricky conditions. With geometry that keeps the rider comfortable on rides long or short and a kickstand, it's a great choice for commutes.
$875.00
This Kona classic brings some of the finer things to light. The Fire Mountain is running a smooth-shifting 9-speed drivetrain to keep things manageable across varying terrain and hydraulic disc brakes to stop on a dime. With 100mm of adjustable suspension and sturdy tires aboard wider 27mm rims, the Fire Mountain helps build confidence off-road. Available for smaller riders in a 26" wheeled XS version and a 27.5" wheel for sizes S-XL. Wheel size: - Size X-Small: 26-inch - Sizes Small – X-Large: 27.5-inch
$6,999.00
The Hei Hei CR DL is a bike that wins big. It's bagged three 24-hour solo world championships under Cory Wallace. It's won huge stage races and its bagged world records. The gorgeous Kona Race Light Carbon frame features tasty, high-end components that are light, sturdy, and intended to go the distance. Don't be fooled by the 120mm of travel. We built this bike so not only does it climb like a bat out of hell, but it is fully capable of taking you down some seriously tricky terrain. Go fast and win big with the Hei Hei CR DL. KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. FUSE INDEPENDENT SUSPENSION The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
$1,899.00
Often imitated, but never duplicated, the Honzo is a part of Kona's foundation. The Honzo is the solution for the rider wanting something a bit more aggressive than a traditional cross-country hardtail. A 120mm fork provides just enough suspension to make quick work of technical sections of trail. Whether you're a seasoned rider looking for a timeless hardtail or a newer rider looking to go a bit deeper into the mountain bike world, the Honzo is an excellent choice.
$699.00
We all remember our first mountain bike. For many of us, it was a bike like the Lana'I. Affordable enough not to feel too risky but stocked with components that give you the freedom to explore off-road. The Lana'I features integrated shifters and brake levers to streamline the cockpit and is now available in three wheel sizes: 26" for size XS, 27.5" for S and M, and 29" for L and XL. With an 8-speed drivetrain, grippy disc brakes, and a 100mm travel fork, the Lana'I is the perfect way to taste what real singletrack riding has to offer. Wheel size: - Sizes X-Small: 26-inch - Sizes Small – Medium: 27.5-inch - Sizes Large – X-Large: 29-inch
$875.00
The Lava Dome is kind of like your best friend, but in bike form. It's awesome in the dirt. It's awesome to rally around town. It's awesome poking around neighborhood singletrack, and it does it all in a dependable way. The Lava Dome features an easy-to-use 9-speed drivetrain with a clutch rear derailleur as well as sleek internal cable routing and dropouts. With strong 29" wheels that can accept up to 2.6" tires, this bike is ready for everything in its path!
$1,199.00
The Mahuna strikes that perfect balance of mountain bike and all-around fun rig. Its 29" wheels easily roll over obstacles and provide a smooth, predictable ride. The fork features 100mm of smooth travel and together with the 29" wheels, helps keep bumps in check. You have complete control over stopping with powerful hydraulic disc brakes. An 11-speed drivetrain makes quick work of tough hills ensuring the Mahuna is as fun going up as it is going down.
$8,199.00
If the Undertaker rode a mountain bike, he'd undoubtedly ride the Process X CR DL. Aimed at nothing but ripping riders on the most technical of terrain, the Process X DL is a monster on the trails. A full carbon frame features high-end components that leave nothing to be desired. 170mm of plush travel ensures that even the biggest hits are well tamed. Clean lines, fewer cables, and more badass than ever before, the Process X CR DL is as stealthy as it is aggressive. Wheel size: - Size Small: 29-inch (front) / 27.5-inch (rear) - Sizes Medium – X-Large: 29-inch KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
$2,599.00
The Rove LTD is everything you'd expect from a bike made for going the distance across mixed surfaces. This gorgeous Butted Cromoly frame features a tapered headtube, our Rove Verso Full Carbon flat mount disc fork with the ability to carry a host of gear. You can't find a bike this pretty with spec this nice at this price. It's a bike aficionado's value bike. The Rove LTD is the perfect blend of function and aesthetics and is ready for your next adventure. KONA CROMOLY Very few materials offer as much shock absorption, durability and supple-ride characteristics as steel. We've never strayed from cycling's original material and have worked tirelessly to adapt, refine and innovate Kona Cromoly framesets as rider demands continue to evolve. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x142mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. 650b WHEELS 650b wheels and tires have a similar overall diameter to a traditional 700c gravel or commuting tire, but with a smaller diameter rim and a wider, taller tire. The extra air volume in this new generation of urban and mixed-surface tires means they can be run comfortably at lower pressures while still rolling quickly on a variety of surfaces. It's the best of both worlds.
$2,099.00
The Sutra is many things. It's functional. It's stylish. It's incredibly versatile, and it comes ready for the long haul on the bike tour of your dreams. Our Kona Cromoly steel frame is outfitted with a Brooks saddle and microfiber bar tape, integrated shifter/brake levers, proper fenders and a real Tubus Tara Big Apple low-rider front rack. It's a modern take on the classic touring bike. It's a grocery getter that's easy on the eyes. It's the feeling of steel across pavement that reminds you why you love turning the cranks on long rides. Just like its name suggests it's the perfect guide for your every ride. KONA CROMOLY Very few materials offer as much shock absorption, durability and supple-ride characteristics as steel. We've never strayed from cycling's original material and have worked tirelessly to adapt, refine and innovate Kona Cromoly framesets as rider demands continue to evolve. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x142mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
$2,699.00
The Sutra LTD is one of those bikes that just changes everything. You thought you were a mountain biker, but you find yourself sneaking off on adventures and enjoying the drop bars on the LTD. You thought you were a roadie but find yourself absolutely destroying singletrack when no one else is looking and suddenly it's all you wanna do! That's the best part about the Sutra LTD—it broke the mold of what a bike has to be. It's got bigger tires, burlier construction, and enough mounts to hold a horse. But who needs a horse when this is your horse?
$1,599.00
The Unit X has become a cult favorite among die-hard Kona fans. Maybe it's the Cromoly frame. Maybe it's the fact that it's a bike packing monster, or its well-geared 12-speed drivetrain, or modular dropouts which give you the ability to run it as a single speed if that's your thing. Maybe it's because the rigid fork makes it that much more of a classic. We may never know why the Unit X is such a popular bike, but we can only guess it's because it is one of the most practical machines in our lineup. REYNOLDS 520 CROMOLY Reynolds 520 tubes are mandrel-butted for accurate profiles and available in a wide range of shapes. Weight savings from butting provides competitively priced, light framesets that are noticeably compliant on the road or the trail, and are guaranteed to last a lifetime. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. 44mm HEAD TUBE 44mm headtubes are a versatile spec which works with both straight and tapered steerers by switching out the lower headset cup. The stock configuration is internal and is for 1 1/8" steerer. Switching to an external lower cup allows for the use of a tapered 1.5" steerer. The best of both worlds. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
$8,999.00
Level Up The Playing Field. The Furtado’s lively personality will let you level up your riding - whether on your favorite backyard trails or far-flung destinations. With its new mixed wheel setup, the larger front wheel gives you the rollover confidence of a 29er while the smaller 27.5-inch rear wheel keeps you nimble and ensures you’re tracking through corners with ease. Find a fun line, fly over features, and turn every trail into a playful pump track with the Furtado. Design Details: Mixed Wheels The mixed wheel configuration of a 29-inch wheel up front provides traction and stability, while the 27.5" rear wheel allows for quick back wheel steering and lifting. 130mm VPP™ travel VPP™ suspension can be optimized to strike the right balance between pedaling efficiency and all-out bump-chomping prowess. That means wherever you see "VPP™" you know it's tuned to perform exactly how it should for the purpose it's designed for. Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand. Full carbon CC frame CC frames use the very best materials and production processes available. We tailor stiffness for every size to make sure everyone gets the same ride quality. Smaller riders require less reinforcement, and that's remedied with our size-specific frame stiffness tunes. Sag window A window allows easier suspension sag and setup. The details are completed by a neat mud flap to protect the rear shock plus tidy cable routing within the frame and swingarm, and rubberized DT protectors to shrug off strikes. Made to last many lifetimes The legendary fit, finish, and quality construction put this into a league of its own. The frame, bearings, and optional Reserve wheels come with a lifetime warranty and any service is easy to do with our Rider Support pledge.
$6,899.00
Reach New Heights. When the trail beckons you to traverse above tree line and into unmarked territory, the Joplin is ready to take you there. With its 120mm of VPP™ travel and 29-inch wheels, it’s the ultimate climbing partner to help you reach any summit. And when it’s time to point downhill, its head tube angle and slack geo will navigate the most rocky terrain. Whether you’re out on a solo adventure or a soul-lifting ride with friends, the Joplin will let you soar to new heights. Design Details: 29-inch wheels The reduced rolling resistance and larger footprint of 29-inch wheels inspire confidence when climbing over obstacles and helps you cover ground efficiently. 120mm VPP™ travel VPP™ suspension can be optimized to strike the right balance between pedaling efficiency and all-out bump-chomping prowess. That means wherever you see "VPP™" you know it's tuned to perform exactly how it should for the purpose it's designed for. Glovebox Place your ride essentials securely beneath a new high-quality latch and panel in the downtube. The Glovebox comes with a fitted Tool Wallet and Tube Purse, tailored for the frame to keep your tools close to hand. Full carbon C and CC frame Carbon CC frames use the very best materials and production processes available, while Carbon C frames offer the same great features while adding a little more weight to save a little $. Both versions are made in our own factory, are just as strong and stiff as one another, and have a lifetime warranty. Made to last many lifetimes The legendary fit, finish, and quality construction put this into a league of its own. The frame, bearings, and optional Reserve wheels come with a lifetime warranty and any service is easy to do with our Rider Support pledge.
$499.99
Ready to ride. The DK Swift series bikes are an affordable in-road to a life of BMX. The Swift series is sized to fit every rider in your crew. From the 18" Micro for the youngins to the Pro for full-sized humans, every Swift is set for the race track or the pump track, right out of the gate. Each Swift bike is built on a lightweight aluminum frame with race proven geometry, sized by model with proportionate handlebars, cranks, and gearing. The Swift Pro features a sturdy chromoly 3-piece crank for the bigger set, while the rest have 3-piece alloy cranks, sized accordingly. Alloy rims fitted with all-terrain tires put these bikes into motion and provide a smooth ride on any surface. All told, the Swift Series bikes are easy to ride, ready to race, and delivered at an unbeatable price. - Sizing: 3'6" - 4'2" - Ages: 4 - 5 Specs: - Top Tube: 16.25" - Chain Stay: 14.4" - Head Tube: 72º - Seat Tube: 70º
$499.99
Ready to ride. The DK Swift series bikes are an affordable in-road to a life of BMX. The Swift series is sized to fit every rider in your crew. From the 18â" Micro for the youngins to the Pro for full-sized humans, every Swift is set for the race track or the pump track, right out of the gate. Each Swift bike is built on a lightweight aluminum frame with race proven geometry, sized by model with proportionate handlebars, cranks, and gearing. The Swift Pro features a sturdy chromoly 3-piece crank for the bigger set, while the rest have 3-piece alloy cranks, sized accordingly. Alloy rims fitted with all-terrain tires put these bikes into motion and provide a smooth ride on any surface. All told, the Swift Series bikes are easy to ride, ready to race, and delivered at an unbeatable price. - 4'0" - 4'7" - Ages 5 - 7
$350.00
When your 2-3.5 year-old rider is ready to take flight on two wheels, the Cleary AL Gecko is the bike to do it. The Gecko provides a seamless transition from a push bike, making it a safe and fun foray into the world of two wheeled adventure. This 12 inch lightweight kids bike will be your little one's ticket to freedom. The single speed drivetrain makes learning to pedal simple and intuitive. There's a handle into the bottom of the saddle so you can easily help your child balance before they ride off on their own! Don't worry, they'll be back. Cleary recommends measuring your child's inseam and referencing their size chart to determine best fit. The new and redesigned AL Gecko weighs just 12lbs. - The Gecko best fits riders with an inseam of 15" to 18". - First time riders feel safest with their bottom on the saddle and their feet flat on the ground. - A child with a 15" inseam will fit the Gecko with the integrated seat/seat post dropped as low as possible. - Once kids get comfortable on two wheels, they'll want to sit on the saddle with only the balls of their feet on the ground. Thus, a confident rider with a 15" inseam and a first-time rider with a 17" inseam each will feel comfortable set-up with the same position on their bikes.
$500.00
Meet the Hedgehog. This 16-inch kid's bike unlocks a whole new world to preschoolers. The lightweight, durable frame of this little rig is paired with modern geometry and a medium gear ratio, equally adept at climbing and winding it up on the way down. The Hedgehog is confidence inspiring—you'll watch your child progress quickly, easily rolling over obstacles that once seemed all-too-daunting. This bike features hand brakes, just like an adult bicycle, but sized perfectly for little hands. The package comes together in kid-loved and parent-approved colors. Cleary recommends measuring your child's inseam and referencing their size chart to ensure the best fit.  Before your child can read, they can rip. The Hedgehog 16 inch kid's bike unlocks a whole new world to preschoolers. We paired a lightweight frame with modern geometry to a medium gear ratio equally adept at climbing and winding it up on the way down. Nothing on this bike distracts your preschooler from learning to flow on her bike. As kids ride farther over more varied terrain, they become comfortable enough to try some tricks. This confidence translates to independence, adventure, and endless possibilities. We designed the Hedgehog with a freewheel, allowing kids much more rideability than a coaster brake. It's a big detail, which is a game changer for kids and features hand brakes, just like an adult bike, but small, durable, and created with little hands in mind. The Hedgehog is light and strong at just 16 lbs. out of the box. It's also backed by a lifetime warranty against manufacturer's defects. When your trail boss is ready to step up from a 12 inch bike, the Hedgehog 16 inch kids bike will reliably propel your 3 to 5-year-old rider as they climb to new heights, launch jumps, drop stairs and maybe roll around standing on the top tube. Fit Hedgehog is best fit for riders with an inseam of 17" to 21". First time riders feel safest with their bottom on the saddle and their feet flat on the ground. That's how a child with an 18" inseam will fit the Hedgehog with the seat post dropped as low as possible. Once kids get more comfortable on two wheels, they'll want to sit on the saddle with the balls of their feet on the ground. Thus, a confident rider with a 17" inseam and a first-time rider with a 19" inseam will each ride with about the same seat height.
$680.00
Built specifically for riders who are not quite ready for an adult-size bicycle, but have outgrown a 24-inch bike, the Meerkat is their ticket to adventure and independence. The Meerkat is a kid's all-terrain bike that is fast, sleek, and styled to appeal to the 10- to 12-year-old in your life. The 26-inch wheels roll that much faster than 24" and provide a solid platform for taller riders. The Sturmey Archer trigger shifter and 5-speed internally geared hub offer maintenance-free, buttery smooth shifting for thousands of miles. The Meerkat 26 inch is a practical bike, comfortable in urban settings because it's easy to lock up, has no derailleur to get bent in a bike rack, and rolls smoothly over the most pothole-filled route. It's just as capable on a weekend bikepacking trip, just add knobby tires up to 2.35" and your Meerkat is ready to roll for days in the backcountry. To determine the best fit, Cleary suggests measuring your child's inseam and referencing their size chart. - The Meerkat best fit for riders with an inseam of 22" to 26". - The Meerkat has a low bottom bracket height, which allows a rider with a 22" inseam to comfortably start out on the Meerkat. - The seat tube angle on the Meerkat allows the bike fit to grow along with the rider. - The seat moves up and back as you increase saddle height, so even a 5' tall rider will fit the bike well.
$3,500.00
HAUL ASS, NOT CARGO In 2019, Áspero took the gravel world by storm, heralding a “new era of speed in gravel.” Fun, but flat out. The new Áspero remains true to its original brief, but with some improvements: a threaded BB shell, neater cable routing, and a UDH-compatible derailleur hanger for those who want to use SRAM’s Transmission drivetrains. And it’s more aero, of course. In the case of Áspero, aerodynamic performance is less about pure speed as a result of drag reduction, and more about conservation of energy. After a big day in a headwind, the three watts saved over the previous Aspero might add up to one less energy gel your stomach has to digest—WORTH IT. In addition to the drag reduction, we also dropped the seat stays to give a bit more compliance out back, and reduced front-end stiffness slightly to make the last hours of a long race less painful. Between those dropped seat stays, we added in a bit more clearance for mud, too, taking what we learned from R5-CX (and the Unbound mudfest in 2023). It’s a lot of seemingly small improvements, but they add up to a lot. The result is a bike that feels a lot like the original Áspero, but is faster, more comfortable, and more versatile. THREADED BOTTOM BRACKET Aspero uses the asymmetrical T47a threaded bottom bracket we pioneered on R5-CX. It’s a simple, rider-serviceable interface that allows us to deliver the benefits of BBRight in a more user-friendly form. UNIVERSAL DERAILLEUR HANGAR We used SRAM’s Universal Derailleur Hanger (UDH) standard on the new Aspero. It’s ideal if you want to live your best ‘business in the front, party in the back’ life with one of SRAM’s Transmission drivetrains today, and ensures compatibility for future drivetrain developments. INTERNAL CABLE ROUTING Aspero shares the same bearing dimensions as R5, Soloist, R5-CX, and Caledonia, which means you can use any combination of bearing caps and stems. Want a super-racy, fully-internal look? Grab the ST31 and HB13 from R5.
$4,300.00
HAUL ASS, NOT CARGO A new breed of rider is emerging-one who loves the freedom and exploration that gravel culture was founded upon but who has a hunger to ride hard, to go all out, and to explore not just geography but personal limits. This frontier requires a new kind of gravel machine, one engineered not to roam the trails, but to race them. For these athletes, we engineered Aspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It's stiff, Classics-racing stiff, and performs like you'd want a road bike to perform off-road. We think that makes sense, and it's what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. The flip-chip in the fork-we call it the Trail Mixer-keeps the trail measurement consistent whether you choose 700c or 650b tires. This maintains the bike's personality and handling characteristics when you switch from mid-fats to full-fat. There are as many different ways to do gravel as there are gravel bikes these days, but if you're toeing the start line, looking to stay with the lead group, and contend for the victory, Aspero is the bike to get you there.
$5,500.00
HAUL ASS, NOT CARGO In 2019, Áspero took the gravel world by storm, heralding a “new era of speed in gravel.” Fun, but flat out. The new Áspero remains true to its original brief, but with some improvements: a threaded BB shell, neater cable routing, and a UDH-compatible derailleur hanger for those who want to use SRAM’s Transmission drivetrains. And it’s more aero, of course. In the case of Áspero, aerodynamic performance is less about pure speed as a result of drag reduction, and more about conservation of energy. After a big day in a headwind, the three watts saved over the previous Aspero might add up to one less energy gel your stomach has to digest—WORTH IT. In addition to the drag reduction, we also dropped the seat stays to give a bit more compliance out back, and reduced front-end stiffness slightly to make the last hours of a long race less painful. Between those dropped seat stays, we added in a bit more clearance for mud, too, taking what we learned from R5-CX (and the Unbound mudfest in 2023). It’s a lot of seemingly small improvements, but they add up to a lot. The result is a bike that feels a lot like the original Áspero, but is faster, more comfortable, and more versatile. THREADED BOTTOM BRACKET Aspero uses the asymmetrical T47a threaded bottom bracket we pioneered on R5-CX. It’s a simple, rider-serviceable interface that allows us to deliver the benefits of BBRight in a more user-friendly form. UNIVERSAL DERAILLEUR HANGAR We used SRAM’s Universal Derailleur Hanger (UDH) standard on the new Aspero. It’s ideal if you want to live your best ‘business in the front, party in the back’ life with one of SRAM’s Transmission drivetrains today, and ensures compatibility for future drivetrain developments. INTERNAL CABLE ROUTING Aspero shares the same bearing dimensions as R5, Soloist, R5-CX, and Caledonia, which means you can use any combination of bearing caps and stems. Want a super-racy, fully-internal look? Grab the ST31 and HB13 from R5.
$4,200.00
A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. When we design a bike, we start with our library of tube shapes. These shapes are tubes we've used on other models that we know to have various qualities-aerodynamic, stiff, ultralight, etc.-and they help get us to the refinement stage on a bike more quickly. In the case of Caledonia, we wanted durability, lightweight, and aerodynamics to be in balance and selected a package that achieved the performance demands of this kind of race bike. Caledonia uses a standard round bar, stem, and seat post, giving riders the option to build their ultimate ride without compromise. Integrated accessory mounts and hidden fender mounts keep the bike's refined lines so you can ride with lights and computers in a downpour and still look fast. Because we all know if it looks fast, it probably is. Rather than designing multiple versions of the bike with various fit profiles (R5, R-Series, etc.) like we've done in the past, we designed a system that enables a broad range of fits on a single bike while maintaining the aesthetic and functional cleanliness we demand. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.
$5,500.00
A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. When we design a bike, we start with our library of tube shapes. These shapes are tubes we've used on other models that we know to have various qualities-aerodynamic, stiff, ultralight, etc.-and they help get us to the refinement stage on a bike more quickly. In the case of Caledonia, we wanted durability, lightweight, and aerodynamics to be in balance and selected a package that achieved the performance demands of this kind of race bike. Caledonia uses a standard round bar, stem, and seat post, giving riders the option to build their ultimate ride without compromise. Integrated accessory mounts and hidden fender mounts keep the bike's refined lines so you can ride with lights and computers in a downpour and still look fast. Because we all know if it looks fast, it probably is. Rather than designing multiple versions of the bike with various fit profiles (R5, R-Series, etc.) like we've done in the past, we designed a system that enables a broad range of fits on a single bike while maintaining the aesthetic and functional cleanliness we demand. Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun. By placing lower modulus carbon in key areas to mitigate the brittleness of hi-mod fiber-the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders.